Preloader Close

Laser 3-chip LCD projector

MAX-WU75

MAX-WU75

Display technology:0.76 inch Poly-silicon TFT Active Matrix liquid crystal panel × 3
Brightness:7500 ISO lumens
Contrast ratio:2,500,000:1(Dynamic mode)
Resolution:1920 x 1200(WUXGA)

  WITIW MAX series laser projector adopts 3-chip LCD (high temperature polycrystalline silicon HTPS) projection technology, which effectively uses the light source to reduce the light loss. It has the characteristics of high brightness efficiency, large color space, energy saving and environmental protection.
  Compared with other projection technologies, the use of 3-chip LCD (high temperature polycrystalline silicon HTPS) projection technology enables WITIW MAX series projectors to project high color brightness, clear, bright and gorgeous images, without color overflow and rainbow phenomenon, which can make viewing more comfortable.

FEAURES

New laser source technology


Max series laser projector uses a new laser light source, with laser optics and cooling design, making this new product light, convenient and quiet, and longer light source life.


High contrast:2500000:1


The dynamic high contrast ratio of 2.5 million to 1 can better show the details of the delicate picture and light and shade contrast, and bring the user a subtle experience as if they were on the scene.



High resolution:WUXGA


WUXGA (1920x1200 pixels) can present full HD video images, even if projected on the large screen, it can still maintain clear and vivid details, bringing users a dynamic visual experience.



Auto power on


When the projector is in standby mode and the input of computer in1, hdmi2 and video port is detected, the projector will automatically start to display images. When the standby mode is set to network standby (WOL) or energy saving, this function is not available.




All directions: 360 degree projection


Max series projectors support 360 degree omni-directional projection, and users can easily realize their creativity.

Quick start: second response


After the quick start standby mode is enabled, it only takes one second to restart within 30 minutes after shutdown.


HDR High image quality


Two high-quality image adjustment modes for HDR make the projection picture more realistic by activating and expanding the dynamic range of brightness.



Geometric correction (Deformation)


The geometric correction function can be used to image on cylinder, sphere and other curved objects, and the distortion of the image can be adjusted by using the surface correction function.



Edge blending and urved surface projection


Multiple projectors can realize seamless splicing of large images through edge blending function.



Optional lens




SPECS

Projection type Laser 3-chip LCD projector
Display technology 0.76 inch Poly-silicon TFT Active Matrix liquid crystal panel × 3
Brightness 7500 ISO lumens
Resolution ratio 1,920×1,200
Contrast ratio 2,500,000:1(Dynamic mode)
Aspect ratio 16:10
Light source Laser
Light source lifetime 20,000 hours(Standard/Low noise);30,000 hours(Long service life 1);50,000 hours(Long service life 2)
Optical lens shift Electric shift
Lens type Electric zoom/Electric focusing
Projection ratio 0.38,0.74~0.98,0.8,1.2~1.8,1.7~3.0,2.8~4.9,4.9~8.3
Geometric correction Automatic vertical trapezoid correction, manual vertical / horizontal trapezoid correction, support corner correction
Edge blending Yes
Stacking Yes
PbyP/PinP Yes
4K input HDMI 1, HDBaseT and DisplayPort ports support 4K signal input
Inputs HDMI connector ×2, DisplayPort connector x1,15 pin Mini D-sub terminal × 2, Video RCA terminal ×1, 3.5mm (stereo) mini-jack × 1, Audio RCA Jack L/R × 1, HDBaseT RJ-45 port × 1
Outputs 15 pin Mini D-sub terminal × 1 (shared by computer in 2), 3.5mm (stereo) mini jack × 1
Control 9-pin D-sub terminal × 1;REMOTE CONTROL IN 3.5mm (stereo) mini-jack x1,REMOTE CONTROL OUT 3.5mm (stereo) mini-jack x1
WLAN interface Support the purchase of USB wireless adapter USB-WL-5G
Other interfaces USB(A)×1,USB(B)×1,LAN RJ-45 Jack ×1
Internet of Things(IoT) Crestron RoomView (Compatible) ; AMX Device Discovery (Compatible); EXTRON XTP (Compatible); PJ Link (Compatible)
Wide dynamic range(WDR) Yes
Detail enhance(DE) Yes
DICOM simulation mode Yes(This projector is not a medical device. Do not use this mode for actual diagnosis)
Quick Start After the quick start standby mode is enabled, it only takes one second to restart within 30 minutes after shutdown
Auto power on When the projector is in standby mode and the input of computer in1, hdmi2 and video port is detected, the projector will automatically start to display images. When the standby mode is set to network standby (WOL) or energy saving, this function is not available.
360 degree projection Yes
Noise level 32dB ~ 26dB (Standard mode, Ambient Temperature not higher than 23 ℃); 32dB ( Longer service life 1); 32dB (Longer service life 2); 26dB (Silent mode)
Power requirements AC100-240V
Power consumption 520W
Standby power 0.35W(Energy saving mode)
Operational ambient Temperature 0-45 ℃ (Altitude 0-1600m); Temperature 0-40 ℃ (Altitude 1601-3048 m); Humidity 10% - 80% (No condensation); Altitude above 3048 m is not applicable
Storage ambient Temperature 0℃ ~ 50℃; Humidity 20%~80%(No condensation)
Net weight About 18.2 kg
Dimensions (WxHxL) 582 x 215 x 431 mm (Protuberance not included)
Product Certification CCC(China Compulsory Certification); CECP(China Energy-saving Certification Protucts); CEL(China Energy Label);
*For 3-chip LCD technology, please refer to www.3lcd.com/
**The above is only an offer invitation, and the contract is the only way of commitment.
is a trademark of HDBaseT Alliance, please refer to https://hdbaset.org/