Preloader Close

Laser 3-chip LCD projector

MAX-WU55

MAX-WU55

Display technology:0.64 inch Poly-silicon TFT Active Matrix liquid crystal panel × 3
Brightness:5500 ISO lumens
Contrast ratio:1,500,000:1(Dynamic mode)
Resolution:1920 x 1200(WUXGA)

  WITIW MAX series laser projector adopts 3-chip LCD (high temperature polycrystalline silicon HTPS) projection technology, which effectively uses the light source to reduce the light loss. It has the characteristics of high brightness efficiency, large color space, energy saving and environmental protection.
  Compared with other projection technologies, the use of 3-chip LCD (high temperature polycrystalline silicon HTPS) projection technology enables WITIW MAX series projectors to project high color brightness, clear, bright and gorgeous images, without color overflow and rainbow phenomenon, which can make viewing more comfortable.

FEAURES

New laser source technology


Max series laser projector uses a new laser light source, with laser optics and cooling design, making this new product light, convenient and quiet, and longer light source life.


High contrast:1500000:1


The dynamic high contrast ratio of 1.5 million to 1 can better show the details of the delicate picture and light and shade contrast, and bring the user a subtle experience as if they were on the scene.



High resolution:WUXGA


WUXGA (1920x1200 pixels) can present full HD video images, even if projected on the large screen, it can still maintain clear and vivid details, bringing users a dynamic visual experience.



Geometric correction = trapezoid + corner


Max series provides automatic vertical trapezoid correction, manual vertical / horizontal trapezoid correction, corner correction and other functions.


 

All directions: 360 degree projection


Max series projectors support 360 degree omni-directional projection, and users can easily realize their creativity.

Quick start: second response


After the quick start standby mode is enabled, it only takes one second to restart within 30 minutes after shutdown.


Status monitoring function


If the vertical angle of the projector is different from the previous setting, the alarm will be given and the input signal will not be displayed.


Air pressure sensing monitoring


According to the test results of air pressure at different altitudes, the fan speed of the projector is controlled to ensure the stable operation of the projector, so that the projector can adapt to the "plateau effect".




1.7 times shift zoom lens


The powerful 1.7x manual zoom lens can be installed in a wider range, and can be moved manually horizontally and vertically, without causing picture distortion. The picture is easier to aim at the screen during installation.



SPECS

Projection type Laser 3-chip LCD projector
Display technology 0.64 inch Poly-silicon TFT Active Matrix liquid crystal panel × 3
Brightness 5500 ISO lumens
Resolution ratio 1,920×1,200
Contrast ratio 1,500,000:1(Dynamic mode)
Aspect ratio 16:10
Light source Laser
Light source lifetime 20,000 hours(Standard/Low noise);30,000 hours(Long service life 1);50,000 hours(Long service life 2)
Optical lens shift Manual shift
Lens type Manual focusing/No zoom
Projection ratio 1.4~2.4(Zoom ratio 1.7)
Geometric correction Automatic vertical trapezoid correction, manual vertical / horizontal trapezoid correction, support corner correction
Inputs HDMI connector ×2, 15 pin Mini D-sub terminal × 2, Video RCA terminal ×1, 3.5mm (stereo) mini-jack × 2, Audio RCA Jack L/R × 1, HDBaseT RJ-45 port × 1
Outputs 15 pin Mini D-sub terminal × 1 (shared by computer in 2), 3.5mm (stereo) mini jack × 1
Control 9-pin D-sub terminal × 1
WLAN interface Support the purchase of USB wireless adapter USB-WL-5G
Other interfaces USB(A)×1,USB(B)×1,LAN RJ-45 Jack ×1
Internet of Things(IoT) Crestron Connected(Crestron Roomview) ; AMX Discovery ; EXTRON XTP ; PJ Link
Speaker 16W
Wide dynamic range(WDR) Yes
Detail enhance(DE) Yes
DICOM simulation mode Yes(This projector is not a medical device. Do not use this mode for actual diagnosis)
Quick Start After the quick start standby mode is enabled, it only takes one second to restart within 30 minutes after shutdown
Auto power on When the projector is in standby mode and the input of computer in1, hdmi2 and video port is detected, the projector will automatically start to display images. When the standby mode is set to network standby (WOL) or energy saving, this function is not available.
Air pressure sensing monitoring According to the test results of air pressure at different altitudes, the fan speed of the projector is controlled to ensure the stable operation of the projector, so that the projector can adapt to the "plateau effect"
Status monitoring function If the vertical angle of the projector is different from the previous setting, the alarm will be given and the input signal will not be displayed
360 degree projection Yes
Noise level 36dB/27dB(Standard/Low noise,the ambient temperature is not higher than 23℃ )
Power requirements AC100-240V
Power consumption 370W
Standby power 0.5W(Energy saving mode)
Operational ambient Temperature 0-40 ℃ (Altitude 0-1600m); Temperature 0-35 ℃ (Altitude 1601-3048 m); Humidity 10% - 80% (No condensation); Altitude above 3048 m is not applicable
Storage ambient Temperature 0℃ ~ 50℃; Humidity 20%~80%(No condensation)
Net weight About 8.2 kg
Dimensions (WxHxL) 506 x 136 x 424 mm (Protuberance not included)
Product Certification CCC(China Compulsory Certification); CECP(China Energy-saving Certification Protucts); CEL(China Energy Label);
*For 3-chip LCD technology, please refer to www.3lcd.com/
**The above is only an offer invitation, and the contract is the only way of commitment.
is a trademark of HDBaseT Alliance, please refer to https://hdbaset.org/